﻿GET_GEVOMechL2_09_01_01_59 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:08,208
Typical steps to prepare the engine for starting after successful engine-alternator alignment in the locomotive are as follows:

2
00:00:08,208 --> 00:00:18,458
<b>Warning:</b> Starting the engine without removing the barring-over device could result in serious personal injury and/or damage to the engine.

3
00:00:18,458 --> 00:00:22,250
After setting web compression measures within specification:

4
00:00:22,250 --> 00:00:25,583
1. Remove the barring-over device.

5
00:00:25,583 --> 00:00:32,542
2. Reapply the barring device cover and the cam gear timing window cover, if removed.

6
00:00:32,542 --> 00:00:36,708
3. Reapply all crankcase inspection covers.

7
00:00:36,708 --> 00:00:45,250
4. Close all compression release valves and torque to 59 lb.-ft. (80 Nm).






