﻿GET_GEVOMechL2_09_01_01_22 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:05,375
Typical steps to remove the brush holder cover hose and clamps are as follows:

2
00:00:05,375 --> 00:00:16,708
1. Using a correctly sized nut driver or a straight blade screwdriver with a heavy spade, loosen the bolt on the hose clamp until the clamp can be moved around freely.

3
00:00:16,708 --> 00:00:23,875
2. Twist the hose to break it free of the flange pipe, and remove the hose from the flange pipe.

4
00:00:23,875 --> 00:00:28,167
3. Repeat the steps with the other end of the hose.
