﻿GET_GEVOMechL2_09_01_01_21 - ANIMATION Screen
1
00:00:00,000 --> 00:00:03,792
When inspecting the brush holder cover hose and clamps:

2
00:00:03,792 --> 00:00:06,792
Verify that the hose clamps are tight.

3
00:00:06,792 --> 00:00:14,125
If they are loose, assemble them as discussed in the Brush Holder Cover Hose and Clamp Installation section of this module.

4
00:00:14,125 --> 00:00:18,208
Verify that there are no tears or holes in the hose itself.

5
00:00:18,208 --> 00:00:21,083
If there are, replace the hose.

6
00:00:21,083 --> 00:00:25,000
Ensure that the hose is not bunched or pinched under the clamp.

7
00:00:25,000 --> 00:00:28,583
Inspect the clamps for cracks or stripped adjustors.

8
00:00:28,583 --> 00:00:31,083
Replace clamps as required.
