﻿GET_GEVOMechL2_09_01_01_16 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:04,917
7. Clean and replace any components, as required.

2
00:00:04,917 --> 00:00:13,417
8. Remove the bolts and washers holding the bus rings to the brush holders of the brush holder and stud assembly to be removed.

3
00:00:13,417 --> 00:00:20,125
9. Remove the mounting bolt and washer holding the brush holder stud to the brush holder yoke.

4
00:00:20,125 --> 00:00:24,750
10. Remove the brush holder and stud assembly from the yoke.

5
00:00:24,750 --> 00:00:30,667
11. Loosen the brush holder clamp bolt and remove the brush holder clamp pad.

6
00:00:30,667 --> 00:00:35,542
12. Remove the brush holder body from the brush holder stud.

7
00:00:35,542 --> 00:00:42,208
13. Repeat, as necessary, until the faulty brush holder body has been removed.
