﻿1
00:00:00,000 --> 00:00:05,917
18. An alternate method to install the gear case mounting bolts is as follows: 

2
00:00:05,917 --> 00:00:15,333
a. Using a solid washer assembly on 1.00-8 bolts, mount the two remaining bolts and washer assemblies and hand tighten. 

3
00:00:15,333 --> 00:00:28,083
b. Torque the three gear case mounting bolts to 400 lb.-ft. (542 Nm) and then turn them to 55° using the torque/angle wrench. 

4
00:00:28,083 --> 00:00:34,333
<b>Note:</b> The torque accuracy should be within ±3% of its maximum torque. 

5
00:00:34,333 --> 00:00:39,750
The angle accuracy should be within ±3% of its set value. 

6
00:00:39,750 --> 00:00:45,125
The wrench repeatability should be within ±2% of its set value. 

7
00:00:45,125 --> 00:00:50,625
19. Another method to install the gear case mounting bolts is as follows: 

8
00:00:50,625 --> 00:01:03,375
a. Using 4-component load washer assemblies mounted on 12-point flanged 1.00-8 bolts, install the two remaining bolts and washer assemblies and hand tighten. 

9
00:01:03,375 --> 00:01:12,542
<b>Note:</b> For each bolt and washer assembly, ensure that the chamfered side (colored side) of the load washer is against the bolt head.
