﻿GET_GEVOMechL2_08_01_01_79 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:07,792
8. Fill the groove in the bottom half of the gear case at the armature bearing cap bore with the approved sealant.

2
00:00:07,792 --> 00:00:23,500
9. Apply an additional 0.25-inch (6.4-mm) bead by 3-inch (76.2-mm) long of the approved sealant to both sides of the split line.

3
00:00:23,500 --> 00:00:35,625
Repeat this step for the top half of the gear case, except apply the additional 0.25-inch (6.4-mm) bead of sealant to the entire semicircle.

4
00:00:35,625 --> 00:00:42,958
<b>Note:</b> Ensure that sealant does not block or obstruct the armature bearing cap overboard drain slots.
