﻿1
00:00:00,000 --> 00:00:08,625
<b>Note:</b> The traction motor assembly must be removed from the truck and placed on level ground before the gear case can be removed. 

2
00:00:08,625 --> 00:00:13,458
Typical steps to disassemble the gear case are as follows: 

3
00:00:13,458 --> 00:00:18,417
1. Drain the gear case lubricant into a suitable container. 

4
00:00:18,417 --> 00:00:29,583
2. With the motor and axle assembly in the normal horizontal position, remove the eight split line bolts holding the top half of the gear case to the bottom half. 

5
00:00:29,583 --> 00:00:34,625
3. Lift off the top half of the gear case with a crane. 

6
00:00:34,625 --> 00:00:46,375
4. Remove the three gear case mounting bolts and washers or washer assemblies that secure the bottom half to the traction motor frame and drop the gear case to the floor. 

7
00:00:46,375 --> 00:00:54,333
5. If equipped, discard any Nord Lock or 4-component load washers. 

8
00:00:54,333 --> 00:00:58,708
6. Move the gear case to a suitable area.




