﻿1
00:00:00,000 --> 00:00:06,542
d. Install and hand-tighten a fourth bolt and washer between the axle and pinion bores. 

2
00:00:06,542 --> 00:00:13,875
e. Install the remaining bolts and washers that hold the gear case halves together, and tighten all bolts evenly. 

3
00:00:13,875 --> 00:00:17,583
f. Torque all bolts to the proper value. 

4
00:00:17,583 --> 00:00:30,542
g. Verify closure of the upper gear case half by "shim checking" with a 0.010-inch (0.254-mm) shim in the wheel-side flange at the pinion end. 

5
00:00:30,542 --> 00:00:38,083
<b>Note:</b> If the shim fits, loosen all split line bolts, correct the problem, and then re-torque the bolts.
