﻿1
00:00:00,000 --> 00:00:15,125
8. Prior to installing the bottom gear case half, apply 0.25-inch (6.4-mm) bead of sealant to the groove of the pinion bore seal, continuously around the entire circumference of the seal. 

2
00:00:15,125 --> 00:00:20,833
<b>Note:</b> Using the dispensing nozzle, force the sealant into the groove as it is applied. 

3
00:00:20,833 --> 00:00:22,792
Remove excess sealant. 

4
00:00:22,792 --> 00:00:30,125
<b>Warning:</b> The bottom gear case weighs approximately 180 lbs. (82 kg). 

5
00:00:30,125 --> 00:00:34,958
Ensure that the crane and cables are adequate to lift and move the assembly. 

6
00:00:34,958 --> 00:00:47,375
9. Install the bottom half of the gear case, then verify engagement of the gear case leg with the groove in the pinion bore seal, and the motor-side and wheel-side gutters with the gear case opening. 

7
00:00:47,375 --> 00:00:59,583
10. Use C-clamps to draw the bottom half of the gear case to within 0.50 inches (12.7 mm) of the U-tube and motor lugs.

