﻿1
00:00:00,000 --> 00:00:09,583
5. Install the wheel-side axle seal (gutter) to the axle assembly with the lip of the seal located over the wheel and gear hubs. 

2
00:00:09,583 --> 00:00:17,417
<b>Note:</b> The gutter split line should be parallel to the ground with the latch located on the left in the bottom gear case half. 

3
00:00:17,417 --> 00:00:29,542
6. Apply a 0.125 to 0.25-inch (3.18 to 6.4-mm) bead of sealant in the groove and latch the seal. 

4
00:00:29,542 --> 00:00:40,417
7. Apply a 0.125-inch (3.18-mm) bead of sealant to the latch joint, then remove excess sealant. 

5
00:00:40,417 --> 00:00:45,625
<b>Note:</b> Ensure that the sealing surfaces are not pinched or folded.
