﻿1
00:00:00,000 --> 00:00:05,542
5. Install the pinion bore seal into the bearing cap groove as follows: 

2
00:00:05,542 --> 00:00:11,000
a. Start at the top and work the seal into the groove towards the bottom. 

3
00:00:11,000 --> 00:00:17,125
<b>Note:</b> Do NOT stretch the seal on installation; simply roll it over the edge. 

4
00:00:17,125 --> 00:00:24,208
<b>Note:</b> Ensure that the seal is not twisted and that it is seated all the way into the groove bottom. 

5
00:00:24,208 --> 00:00:28,667
b. Seat the seal by tapping with a rubber mallet. 

6
00:00:28,667 --> 00:00:37,333
c. Place the Seating Ring Tool (84A206903P1) over the gasket and rotate it around the gasket. 

7
00:00:37,333 --> 00:00:42,667
<b>Note:</b> If the tool catches the gasket, the gasket is not properly seated. 

8
00:00:42,667 --> 00:00:49,417
Use a rubber mallet to seat the seal until the tool can be rotated fully around the gasket without catching.
