﻿1
00:00:00,000 --> 00:00:08,833
<b>Caution:</b> When prying the lower gear case from the gutter and pinion bore seal, be careful not to damage the gear or pinion teeth. 

2
00:00:08,833 --> 00:00:15,833
5. Pry the lower gear case loose from the gutter on one end and the pinion bore seal on the other end. 

3
00:00:15,833 --> 00:00:24,750
<b>Warning:</b> The motor, wheels, and axle assembly weighs approximately 13,000 lbs. (6,000 kg). 

4
00:00:24,750 --> 00:00:29,625
Ensure that the crane and cables are adequate to lift and move the assembly. 

5
00:00:29,625 --> 00:00:33,000
6. Attach axle slings. 

6
00:00:33,000 --> 00:00:41,417
Use a lifting cable at the motor lifting eye and raise the motor, wheels, and axle assembly to approximately one foot. 

7
00:00:41,417 --> 00:00:49,500
<b>Note:</b> As the assembly is lifted, guide the center bolt pad through the relief on the framehead while freeing the gear case of the gutters. 

8
00:00:49,500 --> 00:00:54,417
7. Remove and discard the gutters and the pinion bore seal. 

9
00:00:54,417 --> 00:00:58,708
8. Carefully position the motor on the nose support.
