﻿1
00:00:00,000 --> 00:00:09,792
<b>Note:</b> Before installing a traction motor combo with a set of wheels or a traction motor combo into the truck, the locking bolt must be removed. 

2
00:00:09,792 --> 00:00:15,500
The proximity of the wheel to the motor makes it impossible to remove the locking bolt later. 

3
00:00:15,500 --> 00:00:22,792
Typical steps to remove the DC armature locking bolt from a DC traction motor combo are as follows: 

4
00:00:22,792 --> 00:00:28,708
1. Release the jam nut on the yellow bolt and back the bolt out completely. 

5
00:00:28,708 --> 00:00:34,280
2. Replace the regular bolt and washer found in the attached bag. 

6
00:00:34,280 --> 00:00:44,375
3. Torque the regular bolt to 110 to 120 lb.-ft. (149 to 163 Nm). 

7
00:00:44,375 --> 00:00:51,042
4. Place the locking bolt and jam nut into the bag, and save for future use.
