﻿1
00:00:00,000 --> 00:00:09,125
6. Install the truck pedestal liners, and ensure that the coil springs seat properly as the traction motor combo is raised. 

2
00:00:09,125 --> 00:00:18,917
7. Raise the drop table until the axle journal bearing housings are completely in place, with the drop table assuming part of the weight of the truck. 

3
00:00:18,917 --> 00:00:25,417
8. Install the four axle journal bearing housing retainers on the truck pedestal legs. 

4
00:00:25,417 --> 00:00:35,833
9. Torque the retainer bolts to 296 to 329 lb.-ft. (401 to 446 Nm). 

5
00:00:35,833 --> 00:00:40,375
10. Remove the four coil spring retaining straps. 

6
00:00:40,375 --> 00:00:47,750
11. Lower the hydraulic jacks and remove all wooden blocks from under the traction motor and the truck.
