﻿GET_GEVOMechL2_08_01_01_16 - ANIMATION Screen
1
00:00:00,000 --> 00:00:04,083
Top off the required quantity of lubricant in the gear case.

2
00:00:04,083 --> 00:00:09,542
Allow the lubricant to redistribute and level out, and then recheck the lubricant level.

3
00:00:09,542 --> 00:00:13,167
Clean the plug to remove any dirt and particles.

4
00:00:13,167 --> 00:00:19,333
Apply an approved sealant to the pipe plug, and then torque the plug to the appropriate torque value.

5
00:00:19,333 --> 00:00:23,042
Lock wire the plug so that it does not vibrate loose.

6
00:00:23,042 --> 00:00:30,083
To drain the gear case lubricant, remove the drain plug located at the side of the bottom gear case.

7
00:00:30,083 --> 00:00:35,500
After draining the gear case, clean the plug to remove any dirt and particles.

8
00:00:35,500 --> 00:00:41,708
Apply an approved sealant to the pipe plug, and then torque the plug to the appropriate torque value.

9
00:00:41,708 --> 00:00:45,333
Lock wire the plug so that it does not vibrate loose.
