﻿GET_GEVOMechL2_07_01_01_64 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:05,958
Typical steps to inspect the equalizer arm and equalizer bar are as follows:

2
00:00:05,958 --> 00:00:13,542
1. Check the match marks on the equalizer arm to verify that the arm has NOT moved relative to the bell crank.

3
00:00:13,542 --> 00:00:18,167
<b>Note: </b>Replace the equalizer arm if it has moved.

4
00:00:18,167 --> 00:00:25,833
2. Visually inspect the equalizer bar rubber bushing for swelling, delamination, and wear.

5
00:00:25,833 --> 00:00:31,208
<b>Caution:</b> Do not contaminate the rubber bushing with oil, paint, or grease.

6
00:00:31,208 --> 00:00:37,000
3. Visually inspect the equalizer bar for any signs of wear or cracking.

7
00:00:37,000 --> 00:00:45,125
4. Visually inspect the equalizer bar for missing nuts and bolts and apply new fasteners, if missing.
