﻿GET_GEVOMechL2_07_01_01_63 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:04,583
Typical steps to inspect the wing plate assembly are as follows:

2
00:00:04,583 --> 00:00:09,875
1. Visually inspect for missing hardware fastened on links.

3
00:00:09,875 --> 00:00:18,667
2. Visually inspect wing plate shear pads and rubber bushings for cracks or delamination of the bonded rubber and metal.

4
00:00:18,667 --> 00:00:22,875
<b>Note: </b>No unbonded rubber or cracks are acceptable.

5
00:00:22,875 --> 00:00:28,333
3. Inspect the wing plate pins for indications of wear and/or clearance.

6
00:00:28,333 --> 00:00:34,083
<b>Note: </b>Pins are designed to be press fit into the reaction arm and the wing plate.

7
00:00:34,083 --> 00:00:42,458
4. Ensure that the shear pad is properly seated in the wing plate, the reaction arm, and the reaction arm cover.
