﻿GET_GEVOMechL2_07_01_01_61 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:16,125
5. Install the retainer lower bearing cap and the four washers and the four bolts on opposite corners, then torque the bolts to 88 ± 5 lb.-ft. (40 ± 2.3 Nm).

2
00:00:16,125 --> 00:00:21,875
6. Install a new thrust washer on top of the retainer lower bearing cap.

3
00:00:21,875 --> 00:00:27,250
7. Install the thrust washer spacer in the center of the thrust washer.

4
00:00:27,250 --> 00:00:31,292
<b>Note: </b>Ensure that both the washers are concentric.

5
00:00:31,292 --> 00:00:48,042
8. Install the thrust washer retainer on top of the thrust washer spacer using four washers and four bolts, then torque the bolts to 58 ± 3 lb.-ft. (26 ± 1.4 Nm).
