﻿GET_GEVOMechL2_07_01_01_60 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:04,500
Typical steps to replace the thrust washer are as follows:

2
00:00:04,500 --> 00:00:13,125
1. Remove the retainer thrust washer and spacer by unscrewing the four bolts and save the hardware for re-installation.

3
00:00:13,125 --> 00:00:17,167
2. Remove and discard the first thrust washer.

4
00:00:17,167 --> 00:00:20,208
<b>Note: </b>Do not discard the spacer.

5
00:00:20,208 --> 00:00:22,833
Save it for re-installation.

6
00:00:22,833 --> 00:00:31,000
3. Remove the four bolts and washers from the retainer lower bearing cap and save the hardware for re-installation.

7
00:00:31,000 --> 00:00:36,000
4. Replace the second thrust washer with a new thrust washer.