﻿GET_GEVOMechL2_07_01_01_59 - ANIMATION Screen
1
00:00:00,000 --> 00:00:06,167
Inspect the bell crank assembly for minimum clearance between the bell crank and the traction cap.

2
00:00:06,167 --> 00:00:16,542
Use a feeler gauge to check that there is a minimum clearance of 0.06 inches (1.5 mm) between the bell crank and the traction cap.

3
00:00:16,542 --> 00:00:25,000
If the clearance is less than 0.06 inches (1.5 mm), the thrust washers might be defective.

4
00:00:25,000 --> 00:00:34,875
Note that there are two thrust washers in the bell crank assembly, one is inside the retainer lower bearing and the other is outside of the retainer lower bearing.
