﻿GET_GEVOMechL2_07_01_01_54 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:05,833
Typical steps to replace the vertical hydraulic dampers on the axle are as follows:

2
00:00:05,833 --> 00:00:12,125
1. Remove all four bolts and washers from each set of damper mounting blocks.

3
00:00:12,125 --> 00:00:17,667
2. Remove and discard both used vertical hydraulic dampers.

4
00:00:17,667 --> 00:00:20,625
3. Install new dampers.

5
00:00:20,625 --> 00:00:27,125
<b>Note: </b>Refer to the applicable Parts Bulletin for recommended replacement part number.

6
00:00:27,125 --> 00:00:33,833
<b>Note: </b>Mating surfaces and threads of dampers must be clean and free of any oil.

7
00:00:33,833 --> 00:00:50,083
4. Reinstall the bolts and washers on each set of damper mounting blocks, then torque the bolts to 312 ± 16 lb.-ft. (422 ± 22 Nm).
