﻿GET_GEVOMechL2_07_01_01_51 - ANIMATION Screen
1
00:00:00,000 --> 00:00:06,458
Inspect each lateral and yaw hydraulic damper for leakage or defective rubber mounting bushings.

2
00:00:06,458 --> 00:00:10,333
A light film of hydraulic fluid on the body is normal.

3
00:00:10,333 --> 00:00:19,125
If the body is wet with fluid, the mounting bushings are worn, or bindings are badly eroded or missing, replace the lateral damper.

4
00:00:19,125 --> 00:00:25,000
<b>Note: </b>Refer to the applicable Parts Bulletin for the recommended replacement part number.

5
00:00:25,000 --> 00:00:34,583
Also, some damper manufacturers require the damper bottom end to be at a minimum of 2º below the top end for effective operation.

6
00:00:34,583 --> 00:00:38,375
These manufacturers mark this bottom position as “BELOW”.

7
00:00:38,375 --> 00:00:44,833
Ensure that “BELOW”, stamped onto the body, is on the bottom side of the lowest end of the damper.

8
00:00:44,833 --> 00:00:54,083
If “BELOW” is at the 12 o’clock or top position, unbolt the small end of the damper and rotate the end by 180°.

9
00:00:54,083 --> 00:00:58,500
If it is at any other position, remove and replace the damper.
