﻿GET_GEVOMechL2_07_01_01_43 - ANIMATION Screen
1
00:00:00,000 --> 00:00:07,042
The traction motor nose suspension provides support for the traction motor between the motor and the truck frame.

2
00:00:07,042 --> 00:00:11,917
Inspect each suspension assembly for defective rubber mounting bushings.

3
00:00:11,917 --> 00:00:21,708
If the mounting bushings are worn, the bushing rubber is extruded from the cast link, or appears damaged in any way, replace the suspension assembly.

4
00:00:21,708 --> 00:00:25,750
Also, check for loose or missing mounting hardware.

5
00:00:25,750 --> 00:00:35,458
<b>Caution: </b>The suspension link is disconnected by cutting the CAMCAR bolts with a torch, a hydraulic splitter, or a removal socket.

6
00:00:35,458 --> 00:00:43,875
If a torch is used, form a shield to protect the rubber parts of the suspension link from heat damage, and use extreme care.

7
00:00:43,875 --> 00:00:48,250
Do not reuse the bolts, washers, or nuts.

8
00:00:48,250 --> 00:00:55,375
<b>Caution: </b>Do not replace CAMCAR bolts and nuts with ordinary fastener bolts and nuts.

9
00:00:55,375 --> 00:01:04,042
Bolts and nuts may loosen during locomotive operation, and cause the traction motor to fail and/or cause other equipment damage.

10
00:01:04,042 --> 00:01:09,125
Refer to the applicable Parts Bulletin for recommended replacement parts.

