﻿GET_GEVOMechL2_07_01_01_33 - ANIMATION Screen
1
00:00:00,000 --> 00:00:10,250
The lateral liners, with two liners per axle bearing housing, provide a wear surface between the axle bearing housing and the truck frame.

2
00:00:10,250 --> 00:00:15,583
The axle bearing housings move vertically between the lateral nylon liners.

3
00:00:15,583 --> 00:00:21,375
These liners float laterally on retaining bolts that are inserted into the truck frame.

4
00:00:21,375 --> 00:00:28,583
Using a step gauge or equivalent, measure the clearances between the lateral liners and the bearing housing tee.

5
00:00:28,583 --> 00:00:31,917
Ensure that the axles are aligned straight.

6
00:00:31,917 --> 00:00:37,833
If the lateral liner clearances exceed the maximum worn limits, replace the liners.

7
00:00:37,833 --> 00:00:43,000
The table lists the clearances and maximum worn limits for the lateral liners.

8
00:00:43,000 --> 00:00:47,708
<b>Note:</b> The center axle has a wider clearance than the end axles.

9
00:00:47,708 --> 00:00:54,625
To reduce clearances, the end axles have a spacer between the truck frame and the outboard lateral liner.

10
00:00:54,625 --> 00:01:00,875
When replacing the lateral liner, ensure that the spacer is not placed between the liner and the tee.

11
00:01:00,875 --> 00:01:04,625
The wear item will always be the lateral liner.
