﻿GET_GEVOMechL2_06_01_01_42 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:10,042
Located on each side of the truck, the purpose of the safety hooks is to ensure the truck does not become separated from the locomotive in the event of a derailment.

2
00:00:10,042 --> 00:00:13,542
Inspect the safety hooks for proper clearances.

3
00:00:13,542 --> 00:00:19,583
If the safety hooks do not meet clearances, identify and replace the defective hooks.

4
00:00:19,583 --> 00:00:23,167
Typical steps to replace safety hooks are as follows:

5
00:00:23,167 --> 00:00:29,167
1. Remove and save the four bolts and hardened washers from the safety hook.

6
00:00:29,167 --> 00:00:31,917
2. Remove the safety hook.

7
00:00:31,917 --> 00:00:38,875
<b>Warning: </b>Safety hooks weigh approximately 117 lbs. (53 kg).

8
00:00:38,875 --> 00:00:41,250
Use an adequate lifting device.

