﻿GET_GEVOMechL2_06_01_01_39 - ANIMATION Screen
1
00:00:00,000 --> 00:00:05,250
A high adhesion truck has two or four vertical snubbers depending on the customer.

2
00:00:05,250 --> 00:00:18,333
These vertical snubbers, also referred to as primary shock absorbers, are mounted parallel to the outside axle springs to reduce unwanted movement and vibrations between the axle and the truck frame.

3
00:00:18,333 --> 00:00:25,417
<b>Note: </b>Vertical hydraulic snubbers are sealed at manufacture and cannot be refilled with fluid.

4
00:00:25,417 --> 00:00:28,083
Leaky snubbers must be replaced.

5
00:00:28,083 --> 00:00:33,958
Inspect each vertical hydraulic snubber for leakage or defective rubber mounting bushings.

6
00:00:33,958 --> 00:00:38,083
A light film of hydraulic fluid on the body is normal.

7
00:00:38,083 --> 00:00:48,208
If the body is wet with fluid, the mounting bushings are worn, or the bindings badly eroded or missing, replace both snubbers on that axle.

