﻿GET_GEVOMechL2_06_01_01_33 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:07,167
Normally, loadbearers are replaced in a Backshop facility when the truck has been removed from the locomotive.

2
00:00:07,167 --> 00:00:13,833
However, in some cases, a loadbearer must be replaced in a Running Repair Service Shop.

3
00:00:13,833 --> 00:00:17,792
Typical steps to replace loadbearers are as follows:

4
00:00:17,792 --> 00:00:22,542
1. Remove the safety hooks.

5
00:00:22,542 --> 00:00:28,458
2. Jack up the locomotive high enough so that the loadbearer can be removed.

6
00:00:28,458 --> 00:00:37,500
<b>Caution: </b>Ensure that cables and traction motor air ducts are not damaged or stretched too far while the locomotive is being jacked.

