﻿GET_GEVOMechL2_06_01_01_23 - ANIMATION Screen
1
00:00:00,000 --> 00:00:05,667
Inspect brake linkage for missing, broken, or loose parts.

2
00:00:05,667 --> 00:00:10,750
Also inspect for badly worn pins, bushings, or wear plates.

3
00:00:10,750 --> 00:00:14,083
Repair or replace parts as necessary.

4
00:00:14,083 --> 00:00:19,333
Check the brake rigging wear plates located on the hangers and truck frame pads.

5
00:00:19,333 --> 00:00:29,417
Replace the wear plates when the working clearance between the wear plate and the mating wear surface exceeds 3/16 inch (4.8 mm).

6
00:00:29,417 --> 00:00:33,292
Check the clearance between the brake shoes and wheels.

7
00:00:33,292 --> 00:00:43,375
If clearance is more than 7/8 inch (22.2 mm), readjust according to steps discussed in the Brake System Adjustment section.

8
00:00:43,375 --> 00:00:46,500
Check brake cylinder piston-rod travel.

9
00:00:46,500 --> 00:00:58,292
If piston-rod travel is 6-1/2 inches (165 mm) or more, readjust according to steps discussed in the Brake System Adjustment section.

10
00:00:58,292 --> 00:01:06,583
<b>Caution:</b> Grease or oil on exposed wear surfaces, collect sand, dirt, and grit, causing surfaces to wear faster.

11
00:01:06,583 --> 00:01:11,250
Do NOT lubricate brake rigging pins, bushings, or wear plates.


