﻿GET_GEVOMechL2_06_01_01_17 - ANIMATION Screen
1
00:00:00,000 --> 00:00:12,250
<b>Note:</b> Because straight-on access is blocked when checking longitudinal clearance, access for the gauge is from the top of the journal housing — the area between the journal housing and the truck frame.

2
00:00:12,250 --> 00:00:21,333
To check the longitudinal clearance, with a tapered gauge, measure the gap between the long-side face of each pedestal liner and the journal housing.

3
00:00:21,333 --> 00:00:28,000
The sum of both measurements is called the total longitudinal gap and it should not exceed 1/2 inch.

4
00:00:28,000 --> 00:00:33,458
<b>Note:</b> When checking lateral clearance, access for the gauge is difficult.

5
00:00:33,458 --> 00:00:39,625
The truck must be on raised rails, and the access point is from underneath the journal housing.

6
00:00:39,625 --> 00:00:48,500
To check the lateral clearance, with a tapered gauge, measure the gap between the short-side face of each pedestal liner and the journal housing.

7
00:00:48,500 --> 00:00:50,833
This is called the lateral gap.

