﻿GET_GEVOMechL2_06_01_01_15 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:06,042
5. Lower the drop table until the axle bearing housing is clear of the springs.

2
00:00:06,042 --> 00:00:12,458
6. Place the shims as required between the coil springs and spring pads.

3
00:00:12,458 --> 00:00:17,417
<b>Note: </b>Ensure that the ears of the shims are pointing towards the axle.

4
00:00:17,417 --> 00:00:24,625
7. Raise the traction motor combo into position and remove the coil spring retaining straps.

5
00:00:24,625 --> 00:00:33,583
8. Reapply the axle bearing housing retainers, then torque the bolts to the value provided in the Running Maintenance Manual.



