﻿GET_GEVOMechL2_06_01_01_05 - ANIMATION Screen
1
00:00:00,000 --> 00:00:10,750
When electrical power is applied to the traction motor, the pinion gear, which is part of the traction motor's shaft, turns the bull gear.

2
00:00:10,750 --> 00:00:15,417
The bull gear, which is pressed onto the axle, turns the axle.

3
00:00:15,417 --> 00:00:19,458
The axle, in turn, causes the wheels to rotate.

4
00:00:19,458 --> 00:00:25,917
One side of each traction motor is physically mounted to the truck frame by means of a motor nose support.

5
00:00:25,917 --> 00:00:35,792
The truck frame is also supported at each end of each axle by means of two coil springs, an axle or journal housing and an axle or journal bearing.

6
00:00:35,792 --> 00:00:38,833
The bearing is pressed onto the end of the axle.

7
00:00:38,833 --> 00:00:43,875
The axle housing surrounds the bearing and holds the two coil springs.

8
00:00:43,875 --> 00:00:48,125
The other end of the coil springs hold up the truck frame.













