﻿GET_GEVOMechL2_05_01_01_60 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:04,875
Typical steps to remove the air-based intercooler package are as follows:

2
00:00:04,875 --> 00:00:16,042
<b>Warning: </b>To prevent personal injury and potential equipment damage, ensure that the engine cannot be started before removing, installing, or adjusting any engine component.

3
00:00:16,042 --> 00:00:20,542
Place the BS in the OFF position to prevent starting attempts.

4
00:00:20,542 --> 00:00:25,917
Also, place the FPB and the LCCB in the OFF position.

5
00:00:25,917 --> 00:00:29,750
Also, apply a warning tag on the EC switch.

6
00:00:29,750 --> 00:00:39,167
<b>Warning: </b>If the locomotive is equipped with Auto Engine Start/Stop (AESS), the diesel engine may start without operator action.

7
00:00:39,167 --> 00:00:43,458
Exercise caution when working around the radiator cab.

8
00:00:43,458 --> 00:00:49,875
Ensure that AESS is disabled before performing any maintenance procedures on the locomotive.

9
00:00:49,875 --> 00:00:54,292
Failure to do so may result in death or serious personal injury.

10
00:00:54,292 --> 00:01:02,875
<b>Warning: </b>All lifting fixtures and support stands referenced have been individually manufactured, tested, and certified.

11
00:01:02,875 --> 00:01:14,125
Lifting devices manufactured by other facilities per these recommended numbers should be individually tested and certified by an appropriate outside testing agency before use.

12
00:01:14,125 --> 00:01:19,833
Follow all Railroad Operating/Shop Procedures concerning lifting devices.

13
00:01:19,833 --> 00:01:23,250
1. Shut down the diesel engine.

14
00:01:23,250 --> 00:01:31,375
2. Depressurize the locomotive cooling system as discussed in the Split Cooling Water System module of this course.

15
00:01:31,375 --> 00:01:34,917
3. Disconnect the battery switch.

16
00:01:34,917 --> 00:01:41,167
4. Unbolt and remove all top covers over the air-based intercooler package.

17
00:01:41,167 --> 00:01:47,167
5. Unbolt and remove the side screens on both sides of the locomotive.
