﻿GET_GEVOMechL2_05_01_01_33 - ANIMATION Screen
1
00:00:00,000 --> 00:00:05,625
The air-based intercooler provides the second stage of the manifold air-cooling process.

2
00:00:05,625 --> 00:00:16,417
The turbocharged air (or combustion air) leaving the water-based intercooler flows through two symmetrical air-to-air heat exchangers, which are mounted in a "V"-shaped configuration.

3
00:00:16,417 --> 00:00:25,833
Two 16 HP, suction-type fans are turned on or off individually to control the cooling air that flows across the heat exchangers.

4
00:00:25,833 --> 00:00:34,708
Two shutters, located at the inlet side of the cooling air paths, can also be opened or closed to provide additional cooling control.

5
00:00:34,708 --> 00:00:40,000
Four shutter control magnet valves are used to open and close the shutters.

6
00:00:40,000 --> 00:00:46,417
The magnet valves are located in the combustion air filter compartment on the helper's side (B-side).

7
00:00:46,417 --> 00:00:52,125
When cooling is not required, both fans are turned off and both shutters are closed.

8
00:00:52,125 --> 00:01:00,708
At Notch 8 engine speed, the outlet air temperature from the air-based intercooler is typically below 122°F.

9
00:01:00,708 --> 00:01:07,458
<b>Note:</b> Engine load, altitude, and ambient air temperature can significantly affect this value.

10
00:01:07,458 --> 00:01:14,708
The air-based intercooler is located in the upper section on the radiator cab adjacent to the univalve assembly.

