﻿GET_GEVOMechL2_05_01_01_29 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:11,000
<b>Warning:</b> To prevent personal injury and potential equipment damage, ensure that the engine cannot be started before removing, installing, or adjusting any engine component.

2
00:00:11,000 --> 00:00:16,458
Place the Battery Switch (BS) in the OFF position to prevent starting attempts.

3
00:00:16,458 --> 00:00:25,292
Also, place the Fuel Pump Circuit Breaker (FPB) and the Local Control Circuit Breaker (LCCB) in the OFF position.

4
00:00:25,292 --> 00:00:30,167
Also, apply a warning tag on the Engine Control (EC) switch.

5
00:00:30,167 --> 00:00:35,625
Typical steps to remove and install new baggy air filters are as follows:

6
00:00:35,625 --> 00:00:39,292
1. Shut down the diesel engine.

7
00:00:39,292 --> 00:00:47,458
2. Open the door to access the combustion air filter compartment from the engineer's side (A-side) of the radiator cab.

8
00:00:47,458 --> 00:00:53,625
3. Remove the bar clamp and the wire cages that are accessible from this side.

9
00:00:53,625 --> 00:00:59,708
4. Remove and replace the used air filters with new approved baggy air filters.

10
00:00:59,708 --> 00:01:03,208
5. Install the wire cages.