﻿GET_GEVOMechL2_03_01_01_74 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:20,625
6. From the outside of the radiator cab, install the previously removed and saved radiator hold-down hex-head bolts, washers, and plates, then tighten the bolts to 110-120 lb.-ft. (150-162 Nm).

2
00:00:20,625 --> 00:00:25,917
7. Install the access plates on the radiator cab.

3
00:00:25,917 --> 00:00:36,583
8. Using the previously removed and saved hex-head bolts, washers, and lockwashers, install the end covers to the radiator cab frame.

4
00:00:36,583 --> 00:00:46,750
9. Using the previously removed and saved hex-head bolts, washers, and lockwashers, install and fasten the walkway covers.

5
00:00:46,750 --> 00:00:55,917
10. Fill the cooling water system, if required as discussed in the Filling the Cooling Water System section of this module.

