﻿GET_GEVOMechL2_03_01_01_68 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:04,042
Typical steps to clean the radiators are as follows:

2
00:00:04,042 --> 00:00:14,875
1. Standing on the walkway cover, clean any dirt accumulation or debris on the cores of the radiators by directing pressurized air from the top down.

3
00:00:14,875 --> 00:00:20,000
<b>Note:</b> If the cores have grease deposits, use a steam jet to clean.

4
00:00:20,000 --> 00:00:27,917
<b>Caution:</b> Ensure that the fins or tubes are not damaged from rough brushing or excessive jet pressure of either steam or air.

5
00:00:27,917 --> 00:00:33,583
<b>Warning:</b> Always use extreme caution when working with compressed air or steam.

6
00:00:33,583 --> 00:00:38,375
Do not direct the flow of compressed air or steam at any human being.

7
00:00:38,375 --> 00:00:42,750
Discharge compressed air or steam only toward areas to be cleaned.

8
00:00:42,750 --> 00:00:51,458
2. Clean the radiator inlet V-screens from the inside out and remove all visible debris using pressurized air.






