﻿1
00:00:00,000 --> 00:00:05,042
7. On the A-side (right side) of the locomotive:

2
00:00:05,042 --> 00:00:13,875
a. Re-install the outer end fastening plate and, if required, the intercooler core end cover using new O-rings as applicable.

3
00:00:13,875 --> 00:00:27,458
b. If required, secure the intercooler core end cover with the 16 Allen bolts, then torque to 31-33 lb.-ft. (42-45 Nm).

4
00:00:27,458 --> 00:00:40,958
c. Secure the outer end fastening plate to the shell using the 28, 3/8-inch hex bolts, then torque to 29.5 lb.-ft. (40 Nm).

5
00:00:40,958 --> 00:00:48,417
<b>Caution:</b> Torque the side plate bolts in a star pattern to prevent side loading and possible O-ring damage.

6
00:00:48,417 --> 00:00:53,375
d. Re-attach the drain hose and fitting to the drain pipe.

7
00:00:53,375 --> 00:00:56,542
e. Close the access door.

8
00:00:56,542 --> 00:01:04,375
8. Refill the water in the cooling system as discussed in the Filling the Cooling Water System section of this module.

9
00:01:04,375 --> 00:01:11,417
9. Visually inspect the intercooler and the associated piping for signs of leakage or damage.

10
00:01:11,417 --> 00:01:17,458
10. Re-install the maintenance access panel underneath the radiator cab wing.