﻿1
00:00:00,000 --> 00:00:19,167
<b>Warning:</b> The approximate nominal weight of the cast WBIC core is 1428 lbs. (648 kg) and the approximate dry core weight is 518 lbs. (235 kg).

2
00:00:19,167 --> 00:00:24,042
Ensure that the lifting device, cables, and straps are adequate.

3
00:00:24,042 --> 00:00:28,042
Failure to do so may result in personal injury or death.

4
00:00:28,042 --> 00:00:34,292
<b>Caution:</b> While lifting the core, ensure that the movement of the core is away from the radiator cab.

5
00:00:34,292 --> 00:00:37,042
Do not simply lift the core straight up.

6
00:00:37,042 --> 00:00:41,125
Failure to do so may result in damage to the components.

7
00:00:41,125 --> 00:00:53,500
7. Install the cast WBIC core removal tool (TESCO T85373) onto the B-side (left side) of the locomotive.

8
00:00:53,500 --> 00:00:58,875
8. Install a lifting eye bolt on the B-side outer end fastening plate.

9
00:00:58,875 --> 00:01:12,583
9. Attach a sling to the B-side eye bolt to pull the core out from the radiator cab and onto the cast WBIC core removal tool (TESCO T85373).

10
00:01:12,583 --> 00:01:33,083
10. After the core has fully cleared the wing of the radiator cab and is stationary on the cast WBIC core removal tool (TESCO T85373), install the other lifting eye bolt on the A-side outer end fastening plate or the intercooler core end cover, if still installed.

11
00:01:33,083 --> 00:01:41,375
11. Attach lifting slings to the two eye bolts, then lift the core and place it on a stable (level) work surface.