﻿GET_GEVOMechL2_03_01_01_74 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:05,333
6. From the B-side (left side) of the locomotive:

2
00:00:05,333 --> 00:00:15,625
a. Remove the maintenance access panel from underneath the wing of the radiator cab, then set the panel aside and save all hardware for re-use.

3
00:00:15,625 --> 00:00:22,917
b. Disassemble and remove the Victaulic couplings securing the piping to the water-based intercooler.

4
00:00:22,917 --> 00:00:32,917
<b>Note:</b> For additional information on disassembly and removal of the Victaulic couplings, refer to the Victaulic Coupling Removal section of this module.

5
00:00:32,917 --> 00:00:36,083
c. Disconnect the vent fitting.

6
00:00:36,083 --> 00:00:48,375
d. Loosen and remove the 10 hex bolts and washers that secure the core access plate to the intercooler shell, then set aside the plate and all related hardware for re-use.

7
00:00:48,375 --> 00:01:00,708
<b>Note:</b> Depending on the fabricated WBIC shell design, it may also be necessary to remove Allen bolts from the front end of the intercooler shell in order to remove the intercooler core.
