﻿GET_GEVOMechL2_03_01_01_64 - ANIMATION Screen
1
00:00:00,000 --> 00:00:10,042
Check the cooling water level by using the water sight glass, but only after the engine has been idling for at least ten minutes with the green LED on.

2
00:00:10,042 --> 00:00:16,542
This delay ensures that all water has drained from the radiators back into the water storage tank.

3
00:00:16,542 --> 00:00:23,750
At IDLE, the correct water level is between the FULL AT IDLE and LOW AT IDLE marks on the water sight glass.

4
00:00:23,750 --> 00:00:30,542
<b>Note:</b> It is recommended to fill the cooling system with pretreated water at the supplied water fill pipe connection.

5
00:00:30,542 --> 00:00:35,583
It is not recommended to remove the pressure cap or blanking plate from the fill pipe.

6
00:00:35,583 --> 00:00:42,875
Follow all Railroad Regulations and Rules concerning the addition of cooling water and water treatment compound.
