﻿GET_GEVOMechL2_03_01_01_87 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:08,208
7. Ensure that the fan tips have clearance around the shroud; if they do not, adjust as necessary.

2
00:00:08,208 --> 00:00:11,167
8. Rotate the fan.

3
00:00:11,167 --> 00:00:16,000
<b>Note:</b> The fan motor must rotate freely with no rubbing sounds.

4
00:00:16,000 --> 00:00:28,333
9. Install the shroud half and metal pan on the side from which the radiator fan and motor was installed, and bolt it to the cover plate with the eight previously removed and saved bolts.

5
00:00:28,333 --> 00:00:41,708
10. Install the two previously removed and saved bolts holding the two halves of the fiberglass radiator fan shroud together at the front and the rear of the shroud, then tighten all ten bolts.
