﻿GET_GEVOMechL2_02_01_01_82 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:07,833
3. Further loosen the nuts securing the filter housing door, if required, and fully open the door. 

2
00:00:07,833 --> 00:00:16,083
4. Remove the 10 used filter elements and inspect the outer surfaces of the used elements for metal particles. 

3
00:00:16,083 --> 00:00:23,458
<b>Note: </b>If metal particles are found, immediately determine and correct the source of the particles. 

4
00:00:23,458 --> 00:00:26,792
5. Discard the used elements. 

5
00:00:26,792 --> 00:00:34,292
<b>Caution: </b>During engine operation, filtered oil flows through holes in the filter guide tubes directly to the engine. 

6
00:00:34,292 --> 00:00:42,833
Do NOT allow particles of sludge or dirt to pass through these holes during cleaning, or damage to critical components can occur. 

7
00:00:42,833 --> 00:00:51,625
6. Wipe clean the inside of the filter housing to prevent the old oil in the housing from contaminating the new oil.
