﻿GET_GEVOMechL2_02_01_01_80 - ANIMATION Screen
1
00:00:00,000 --> 00:00:10,458
Lubricating oil filter elements must be replaced periodically on a planned schedule or when the pressure drop across the lubricating oil filter becomes too high.

2
00:00:10,458 --> 00:00:16,458
 Water in the lubricating oil system permanently degrades the performance of the filter elements.

3
00:00:16,458 --> 00:00:27,458
 Therefore, if the lubricating oil cooler or an engine cylinder is replaced due to an internal water leak, the lubricating oil and filter elements should also be changed.

4
00:00:27,458 --> 00:00:38,083
 It is ideal to replace lubricating oil filter elements when the oil temperature is greater than 160 °F (71 °C).

5
00:00:38,083 --> 00:00:56,000
 When the filter elements are changed, a filter drain back valve can be opened to drain the oil from the filter tank back to the engine crankcase or, if the under-platform oil drain plug is removed and manual drain valve is opened, to barrels or a hose system for collection.

6
00:00:56,000 --> 00:01:10,417
 Opening a vent and sampling valve or quick-disconnect on either the inlet pipe to the oil filter housing or the filter housing door allows air to enter the tank as the oil drains, thus reducing the time to drain the filter tank.
