﻿GET_GEVOMechL2_02_01_01_79 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:04,792
6. Install the previously removed handrail section.

2
00:00:04,792 --> 00:00:15,417
7. Fill the lubricating oil system, if required, as discussed in the fill portion of the Lubricating Oil System Drain and Initial Fill section of this module.

3
00:00:15,417 --> 00:00:29,875
8. Once the oil filter housing is installed, close the BS and then close the LCCB, FPB, and BCCB on the EC panel, remove the warning tag from the EC switch, and start the engine.

4
00:00:29,875 --> 00:00:40,083
9. With the engine at IDLE, check and fill the crankcase lubricating oil level as discussed in the Lubricating Oil Level Check and Fill section of this module.
