﻿GET_GEVOMechL2_02_01_01_69 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:10,917
5. Disconnect the water pipes connected to the oil cooler by removing the four couplings and the two pipes, then plug or block all pipe openings. 

2
00:00:10,917 --> 00:00:19,917
6. Disconnect the clamps holding the fuel hoses, plug or block all hose openings, and save all removed hardware. 

3
00:00:19,917 --> 00:00:30,125
7. Remove the oil inlet pipe flange assembly from the left side of the oil cooler and bolt a blanking plate to the oil cooler inlet flange opening. 

4
00:00:30,125 --> 00:00:37,042
8. Remove the four mounting bolts that secure the oil cooler to the floor of the radiator cab.
