﻿GET_GEVOMechL2_02_01_01_55 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:13,708
<b>Note: </b>In addition to the FULL and ADD marks on the V12 ENGINE IDLING marked side of the dipstick, the opposite ENGINE STOPPED marked side contains graduated markings for use when the engine is stopped. 

2
00:00:13,708 --> 00:00:19,042
The capacity between each mark equals approximately 20 gallons of oil. 

3
00:00:19,042 --> 00:00:24,000
<b>Caution: </b>Do NOT add lubricating oil above the FULL mark on the dipstick. 

4
00:00:24,000 --> 00:00:33,583
An oil level above the dipstick FULL mark can cause potential component damage and possibly result in a false crankcase overpressure indication. 

5
00:00:33,583 --> 00:00:38,958
If an overfill occurs, the oil level must be drained back below the FULL mark. 

6
00:00:38,958 --> 00:00:47,208
<b>Note: </b>For a list of approved lubricating oils, reference the RECOMMENDED FUELS, OILS AND LUBRICANTS publication. 

7
00:00:47,208 --> 00:01:06,667
4. If the lubricating oil level is below the ADD mark on the dipstick with the engine at IDLE, remove the fill cap and add the proper quantity of new approved lubricating oil through the fill pipe adjacent to the dipstick until the oil indication is at, or near, the FULL mark on the V12 ENGINE IDLING marked side of the dipstick.

8
00:01:06,667 --> 00:01:11,042
5. Replace and secure the oil fill cap.
