﻿GET_GEVOMechL2_02_01_01_108 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:10,458
6. Re-install the two front left-side eductor mounting bolts without the spacers, leaving a gap to allow the bracket to move for doughnut seal change out. 

2
00:00:10,458 --> 00:00:15,542
7. Remove the right rear bolts and spacers completely. 

3
00:00:15,542 --> 00:00:26,625
8. Remove the eductor doughnut seal, ensuring that the eductor bracket is secured, which prevents the eductor tube from supporting the bracket weight or position. 

4
00:00:26,625 --> 00:00:31,667
9. Clean the mating surfaces and install a new doughnut seal. 

5
00:00:31,667 --> 00:00:42,583
10. Re-install all eductor bracket bolts and spacers, and torque the bolts to 90 lb.-ft. (122 Nm).
