﻿GET_GEVOMechL2_02_01_01_105 - STEP-BY-STEP Cont Screen
1
00:00:00,000 --> 00:00:04,458
5. Replace the sealing ring and the filter element. 

2
00:00:04,458 --> 00:00:08,375
6. Reassemble the coalescer halves. 

3
00:00:08,375 --> 00:00:14,083
7. Ensure that the coalescer halves are properly aligned with each other. 

4
00:00:14,083 --> 00:00:21,833
Then, replace the clamp and torque the clamp nut to 4.4 lb.-ft. (6 Nm). 

5
00:00:21,833 --> 00:00:29,833
8. Install the coalescer on the IFE cover as discussed in the Coalescer Installation section of this module.
