﻿GET_GEVOMechL2_11_01_01_54 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:06,833
Typical steps to remove the filter element in the Salem 975 filter are as follows:

2
00:00:06,833 --> 00:00:11,833
1. Remove the six hex nuts and lockwashers.

3
00:00:11,833 --> 00:00:16,917
<b>Note: </b>The bottom cap and drain valve will drop down with the gasket.

4
00:00:16,917 --> 00:00:21,250
2. Remove the wing nut and filter retainer.

5
00:00:21,250 --> 00:00:24,375
3. Remove the filter element.

6
00:00:24,375 --> 00:00:28,708
Inspect and replace any damaged component as necessary.
