﻿GET_GEVOMechL2_11_01_01_51 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:05,583
Typical steps to install the coalescer element into the air dryer are as follows:

2
00:00:05,583 --> 00:00:13,417
1. Lubricate a new O-ring with Dow Corning 55M lubricant and install it on the cap.

3
00:00:13,417 --> 00:00:21,083
2. Install the new coalescer element and cap, then secure the cap with the eight cap screws.

4
00:00:21,083 --> 00:00:28,417
3. Torque the screws to 20-26 lb.-ft. (28-36 Nm).
